%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%
%%% File: udthesis.sty, May 2000
%%% =============================================
%%% Created from file utthesis.sty
%%% Updated by Jesus Bisbal on May 2000 to adhere to the 
%%% University of Dublin, Trinty College regulations:
%%%
%%% 1. Page size: 35mm left side, 20mm right side.
%%% 2. textpagestyle set to 'headings' instead of 'plain'
%%% 3. 'thebibliography' environment reported errors in the initial version. It
%%%      was changed to be exactly the same as in report.cls, but adding an entry
%%%      to the table of contents.
%%% 4. Page numbering at the bottom of the page and centered.
%%%
%%%
%%% File: utthesis.sty, version 2.0, January 1995
%%% =============================================
%%% Copyright (c) 1995 by Dinesh Das.  All rights reserved.
%%% This file is free and can be modified or distributed as long as
%%% you meet the following conditions:
%%%
%%% (1) This copyright notice is kept intact on all modified copies.
%%% (2) If you modify this file, you MUST NOT use the original file name.
%%%
%%% This file defines macros used for preparing theses for
%%% The University of Texas at Austin.  It has been tested with LaTeX2e.
%%% I do NOT guarantee that it will meet all requirements of the
%%% Graduate School; however, if you find that something violates the
%%% specifications, please send me email at <ddas@cs.utexas.edu> and
%%% I will try to fix it.
%%%
%%% Usage:
%%% ======
%%%
%%% To use this file with LaTeX2e, make sure your TEXINPUTS environment
%%% variable contains the directory in which this file is located.
%%% Include this file as a package in the preamble:
%%%
%%% \documentclass[...]{report}
%%% \usepackage{utthesis}
%%%
%%% On non-UNIX systems, there might be different environment variables
%%% that might need to be set.  I know nothing about such machines,
%%% however; consult your local guru for details.
%%%
%%% A template for a thesis is provided in the file "utthesis.doc", available
%%% from the same place where you obtained this file.
%%%
%%% Command Names:
%%% ==============
%%%
%%% ALL command names used in this file that are used to format the
%%% thesis begin with "thesis" (e.g., \thesisauthor).  All of these
%%% commands can be changed by the user using \renewcommand, e.g.,
%%%
%%% \renewcommand{\thesisauthor}{First M. Last}
%%%
%%% after loading the package in LaTeX2e.
%%%
%%% The following is a list of all thesis-related variables used together
%%% with their default values:
%%%
%%% \thesisauthor    %% Name of the author; defaults to "Ima Student".
%%% \thesismonth     %% Month of graduation; defaults to "May".
%%% \thesisyear      %% Year of graduation; defaults to "1994".
%%% \thesistitle     %% Full title of dissertation; defaults to "Title".
%%% \thesistitletypesize
%%%                  %% Typesize used to typeset \thesistitle; defaults
%%%                  %% to \Large.
%%% \thesisauthorpreviousdegrees
%%%                  %% Previous degrees of author; defaults to "Degree"
%%% \thesissupervisor%% Name of thesis supervisor; defaults to "Supervisor"
%%% \thesisauthoraddress
%%%                  %% Permanent address of author; defaults to "USA"
%%% \thesisapprovedby%% Approval of dissertation committee; defaults to
%%%                  %% "Approved by".
%%% \thesisapprovedbytypesize
%%%                  %% Typesize used to typeset \thesisapprovedby; defaults
%%%                  %% to \large.
%%% \thesiscopyrightholder
%%%                  %% Name of copyright holder; defaults to \thesisauthor.
%%% \thesistypist    %% Name of thesis typist; defaults to "the author".
%%% \thesistype      %% Type of thesis; defaults to "Dissertation".
%%% \thesistypetypesize
%%%                  %% Typesize used to typeset \thesistype; defaults to
%%%                  %% \large.
%%% \thesisdegree    %% Degree for which thesis is submitted; defaults to
%%%                  %% "Doctor of Philosophy".
%%% \thesisdegreetypesize
%%%                  %% Typesize used to typeset \thesisdegree; defaults to
%%%                  %% \large.
%%% \thesisdegreeabbreviation
%%%                  %% Abbreviation of \thesisdegree; defaults to "Ph.D.".
%%% \thesiscommitteesize
%%%                  %% Number of members in thesis committee; defaults to 5.
%%% \thesiscommittee %% Name of thesis committee; defaults to
%%%                  %% "Dissertation Committee:".
%%% \thesiscommitteetypesize
%%%                  %% Typesize used to typeset \thesiscommittee; defaults
%%%                  %% to \large.
%%% \thesisvitahead  %% Title of the vita page; defaults to "Vita".
%%% \thesisvitaheadtypesize
%%%                  %% Typesize used to typeset \thesisvitahead; unused.
%%% \thesisacknowledgmenthead
%%%                  %% Title of the acknowledgments page; defaults to
%%%                  %% "Acknowledgments".
%%% \thesisacknowledgmentheadtypesize
%%%                  %% Typesize used to typeset \thesisacknowledgmenthead;
%%%                  %% unused.
%%% \thesisacknowledgmentsigname
%%%                  %% Signature on the acknowledgments page; defaults to
%%%                  %% \thesisauthor.
%%% \thesisacknowledgmentsignametypesize
%%%                  %% Typesize used to typeset \thesisacknowledgmentsigname;
%%%                  %% defaults to \large.
%%% \thesisacknowledgmentsigplace
%%%                  %% Address used on the acknowledgments page; defaults
%%%                  %% to "The University of Texas at Austin \\ \thesismonth
%%%                  %% \thesisyear".
%%% \thesisstudent   %% Name of author with previous degrees; defaults to
%%%                  %% "\thesisauthor, \thesisauthorpreviousdegrees".
%%% \thesisstudenttypesize
%%%                  %% Typesize used to typeset \thesisstudent; defaults
%%%                  %% to \large.
%%% \thesisdedication%% Person or thing dedicated to; defaults to
%%%                  %% "To myself". :-)
%%%
%%% Most of the default values will satisfy the Graduate School's
%%% requirements; however, at a minimum, the user SHOULD redefine the
%%% following commands:
%%%
%%% \thesisauthor
%%% \thesismonth
%%% \thesisyear
%%% \thesistitle
%%% \thesisauthorpreviousdegrees
%%% \thesissupervisor
%%% \thesisauthoraddress
%%%
%%% In addition to the above variables, the following commands are
%%% provided to generate the optional sections of the thesis:
%%%
%%% \thesiscopyrightpage
%%%                  %% Generates the copyright page.
%%% \thesistitlepage %% Generates the title page.
%%% \thesissignaturepage
%%%                  %% Generates the signature page.
%%% \thesisdedicationpage
%%%                  %% Generates the dedication page.
%%%
%%% There are also a few environments to generate paragraph-like text:
%%%
%%% thesisacknowledgments
%%%                  %% Text of acknowledgments.
%%% thesisabstract   %% Text of abstract.
%%% thesisauthorvita %% Text of author's vita.
%%%
%%% Bells and Whistles:
%%% ===================
%%%
%%% The following commands are provided purely for playing around with.
%%% They should be used in the document preamble (before \begin{document}).
%%%
%%% \thesisdraft     %% Prints a timestamp at the top of each page.  This
%%%                  %% must be invoked in the document preamble (before
%%%                  %% \begin{document}).
%%% \leftchapter, \centerchapter, \rightchapter
%%%                  %% These commands generate left-justified, centered,
%%%                  %% and right-justified chapter headings, respectively.
%%% \singlespace, \oneandhalfspace, \doublespace
%%%                  %% These define the line spacing to single-space,
%%%                  %% one-and-one-half space, and double-space
%%%                  %% respectively.  Note that the minimum spacing
%%%                  %% required by the Graduate School is \oneandhalfspace,
%%%                  %% but \singlespace is useful, e.g., when using
%%%                  %% \thesisdraft.
%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\typeout{*******************************************************}%
\typeout{** University of Dublin Thesis style file, May 2002    }%
\typeout{**     by Stefan Weber                                 }%
\typeout{** Department of Computer Science                      }%
\typeout{** Trinity College Dublin                              }%
\typeout{**    (Requires fancyhdr package)                      }%
\typeout{**    altered by the eoinn                  }%
\typeout{*******************************************************}%

%%%
%%% Set up page layout parameters.
%%%
% The following was added Jesus Bisbal
\setlength\paperheight {297mm} %
\setlength\paperwidth  {210mm} %
\setlength{\oddsidemargin}{10mm}%
\setlength{\evensidemargin}{10mm}%
\setlength{\textwidth}{155mm} %

% The following was commented out by Jesus Bisbal
%\setlength{\textheight}{235mm}
%\setlength{\oddsidemargin}{20mm}
%\setlength{\evensidemargin}{20mm}
%\setlength{\textwidth}{150mm}
%\setlength{\topmargin}{20mm}
%\setlength{\headheight}{0in}
%\setlength{\headsep}{0in}
%\setlength{\parindent}{12mm}

%%%
%%% Set up default values.
%%%
\newcommand{\@universityname}{University of Dublin, Trinity College }
\newcommand{\@publicationno}{Publication No.\ \line(1,0){40} \\[10mm]}
\newcommand{\thesisauthor}{Eoin Curran}
\newcommand{\thesismonth}{May}
\newcommand{\thesisyear}{2002}
\newcommand{\thesistitle}{hhhh}
\newcommand{\thesistitletypesize}{\Large}
\newcommand{\thesisauthorpreviousdegrees}{Degree}
\newcommand{\thesissupervisor}{Supervisor}
\newcommand{\thesisauthoraddress}{Ireland}
\newcommand{\thesisapprovedby}{Approved by}
\newcommand{\thesisapprovedbytypesize}{\large}
\newcommand{\thesiscopyrightholder}{\thesisauthor}
\newcommand{\thesistypist}{the author}
\newcommand{\thesistype}{Dissertation}
\newcommand{\thesistypetypesize}{\large}
\newcommand{\thesistypesize}{\large}
\newcommand{\thesisdegree}{Doctor of Philosophy}
\newcommand{\thesisdegreetypesize}{\large}
\newcommand{\thesisdegreeabbreviation}{Ph.D.}
\newcommand{\thesiscommitteesize}{5}
\newcommand{\thesiscommittee}{Dissertation Committee:}
\newcommand{\thesiscommitteetypesize}{\large}
\newcommand{\thesisvitahead}{Vita}
\newcommand{\thesisvitaheadtypesize}{\Large}
\newcommand{\thesisacknowledgmenthead}{Acknowledgements}
\newcommand{\thesisabstracthead}{Abstract}
\newcommand{\thesisacknowledgmentheadtypesize}{\Large}
\newcommand{\thesisacknowledgmentsigname}{\thesisauthor}
\newcommand{\thesisacknowledgmentsignametypesize}{\large}
\newcommand{\thesisacknowledgmentsigplace}%
    {{\slshape
       \renewcommand{\arraystretch}{1.0}
       \begin{tabular}{l}
     {\bf \thesisacknowledgmentsigname }\\
         \@universityname \\
         \thesismonth\ \thesisyear
       \end{tabular}}}
\newcommand{\thesisstudent}{\thesisauthor}
\newcommand{\thesisstudenttypesize}{\large}
\newcommand{\thesisdedication}{To myself}

%%%
%%% Command for masters theses.  \phdthesis is provided for symmetry.
%%%
\newcommand{\mastersthesis}{
    \renewcommand{\thesistype}{Thesis}
    \renewcommand{\@publicationno}{}
    \renewcommand{\thesisdegree}{Master of Arts}
    \renewcommand{\thesisdegreeabbreviation}{M.A.}
    \renewcommand{\thesiscommitteesize}{2}
    \renewcommand{\thesiscommittee}{Supervising Committee:}}
\newcommand{\phdthesis}{}

%%%
%%% Set up other commands.
%%%
\newcommand{\@defaultbaselinestretch}{1.5}
\newcommand{\@base}[1]{\renewcommand{\baselinestretch}{#1}}
\newcommand{\singlespace}{\renewcommand{\@defaultbaselinestretch}{1.1}}
\newcommand{\oneandhalfspace}{\renewcommand{\@defaultbaselinestretch}{1.5}}
\newcommand{\doublespace}{\renewcommand{\@defaultbaselinestretch}{1.7}}
\newcommand{\@thesistitle}{\textbf{\thesistitletypesize \thesistitle}}
\newcommand{\@thesisapprovedby}%
    {\textbf{\thesisapprovedbytypesize \thesisapprovedby}}
\newcommand{\@thesistype}{\textbf{\thesistypetypesize \thesistype}}
\newcommand{\@thesisdegree}{\textbf{\thesisdegreetypesize \thesisdegree}}
\newcommand{\@thesisdegreeabbreviation}{\thesisdegreeabbreviation}
\newcommand{\@thesiscommittee}%
    {\textbf{\thesiscommitteetypesize \thesiscommittee}}
\newcommand{\@thesisvitahead}{\thesisvitahead}
\newcommand{\@thesisacknowledgmenthead}%
    {\thesisacknowledgmenthead}
\newcommand{\@thesisacknowledgmentsigname}%
    {\textsc{\thesisacknowledgmentsignametypesize \thesisacknowledgmentsigname}}
\newcommand{\@thesisacknowledgmentsigplace}{\thesisacknowledgmentsigplace}
\newcommand{\@thesisstudent}{\textbf{\thesisstudenttypesize \thesisstudent}}

%%%
%%% Indent the first paragraph after a sectioning command.
%%%
%%% \let\@afterindentfalse\@afterindenttrue
%%% \@afterindenttrue

%%%
%%% Set up default page numbering and line spacing.
%%%
\newcommand{\@textpagenumbering}{arabic}
\newcommand{\@preamblepagenumbering}{roman}

%\newcommand{\@textpagestyle}{plain}   %
%\newcommand{\@textpagestyle}{headings} % Jesus Bisbal

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Jesus Bisbal
%% Requires fancyhdr package !!!!!!
%% Changes the header and footer to agree with Graduate Studies Office
%% regulations: page number centered at the bottom of the page.
%% Additionally, it shows the chapter and section in the header, toghether
%% with an underlying line.
%%\newcommand{\@textpagestyle}{fancy}
\newcommand{\@textpagestyle}{plain}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


\newcommand{\@preamblepagestyle}{plain}
\pagenumbering{\@preamblepagenumbering}
\@base{\@defaultbaselinestretch}

\newcommand{\@chaptertype}{\chaptername}
\newcommand{\@appendix}{0}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Jesus Bisal, May 2000
%% Command to create a space for a signature.
%% It will write a horizontal line with the value of the second parameter under it.
%% The value of the first parameter will be in front of the line.
%% The third parameter will be added under the second, it should usually be the date
%% in which the document will be signed.
%% All parameters are optional.
\def\signature#1#2#3%
{\parbox[b]{1in}{\smash{#1}\vskip12pt}%
 \hfill \parbox[t]{3in}{\shortstack{\vrule width 3in height 0.4pt\\\small#2} \vskip20pt
 \centering#3}}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\def\sigskip{\vskip0.15in plus 0.2in minus 0.1in}

%%%
%%% Command to generate copyright page.
%%%
\newcommand{\thesiscopyrightpage}{
    \thispagestyle{empty}
    \strut \vfill
    \begin{center}
      \begin{spacing}{2}
      Copyright \\ by \\ \thesiscopyrightholder \\ \thesisyear
      \end{spacing}
    \end{center}
    \vfill \strut
    \newpage}

%%%
%%% Command to generate title page.
%%%
\newcommand{\thesistitlepage}{
    \thispagestyle{empty}
    \begin{spacing}{2}
    \begin{center}
      \@thesistitle\\
      \vspace{26mm}
      \@thesisstudent \\
      \vspace{26mm}
      A thesis submitted to the \@universityname \\
      in partial fulfillment of the requirements for the degree of \\
      \thesisdegree \\
      \vspace{26mm}
      \thesismonth \ \thesisyear
    \end{center}
    \end{spacing}
    \newpage}

%%%
%%% Command to generate declaration page.
%%%
\newcommand{\thesisdeclarationpage}{
    \thispagestyle{empty}
    \begin{spacing}{2}
    \begin{center}
      \section*{Declaration}
    \end{center}
      \vspace{26mm}
      I, the undersigned, declare that this work has not previously been submitted to this or any
      other University, and that unless otherwise stated, it is entirely my own work.\\ \\
      \vspace{26mm}
      \sigskip\signature{}{\thesisauthor}{Dated: \today} \\
    \end{spacing}
    \newpage}

%%%
%%% Command to generate permision page.
%%%
\newcommand{\thesispermisionpage}{
    \thispagestyle{empty}
    \begin{spacing}{2}
    \begin{center}
      \section*{Permission to Lend and/or Copy}
    \end{center}
      \vspace{26mm}
      I, the undersigned, agree that Trinity College Library may lend or copy this thesis upon
      request.\\ \\
      \vspace{26mm}
      \sigskip\signature{}{\thesisauthor}{Dated: \today} \\
    \end{spacing}
    \newpage}

%%%
%%% Command to generate signature page.
%%%
\newcommand{\thesissignaturepage}{
    \thispagestyle{empty}
    \begin{spacing}{2}
    \strut \vfill
    \begin{center}
      \@thesistitle
    \end{center}
    \vspace{50mm}
    \mbox{} \hfill \begin{minipage}{67mm}
                     \begin{spacing}{1}
                     \@thesisapprovedby\hfill\mbox{} \\
                     \@thesiscommittee \\[15mm]
                     \end{spacing}
                     \setlength{\unitlength}{1mm}
                     \begin{picture}(67,70)(0,0)
                       \multiput(0,70)(0,-10)
                         {\thesiscommitteesize}{\line(1,0){67}}
                     \end{picture}
                   \end{minipage}
    \vfill \strut
    \end{spacing}
    \newpage}

%%%
%%% Environment to generate abstract page.
%%%
\newenvironment{thesisabstract}
    {\addcontentsline{toc}{chapter}{Abstract}
     \vspace*{0mm}
     %\setlength{\unitlength}{1mm}
     \chapter*{\thesisabstracthead}
     }
     
%%%
%%% Command to generate dedication page.
%%%
\newcommand{\thesisdedicationpage}{
    \thispagestyle{empty}
    \strut \vfill
    \begin{spacing}{\@defaultbaselinestretch}
    \begin{center}
      \thesisdedication
    \end{center}
    \end{spacing}
    \vfill \strut
    \newpage}

%%%
%%% Environment to generate acknowledgments page.
%%%
\newenvironment{thesisacknowledgments}
    {
     \chapter*{\@thesisacknowledgmenthead
         \@mkboth{\uppercase{\@thesisacknowledgmenthead}}
                 {\uppercase{\@thesisacknowledgmenthead}}}
     \addcontentsline{toc}{chapter}{\@thesisacknowledgmenthead}
     \begin{spacing}{\@defaultbaselinestretch}}
    {\end{spacing} \par \vspace{20mm}
     \raggedleft \@thesisacknowledgmentsigplace }
     % Adding \newpage at the end of this environment sets the 'place' on the rightside of the page.

%%%
%%% Environment to generate list.
%%%
\newenvironment{thesispubs}
    {\newpage
     \begin{center}
     \section*{Publications Related to this \@thesisdegreeabbreviation
         \@mkboth{\uppercase{Publications Related to this \@thesisdegreeabbreviation}}
                 {\uppercase{Publications Related to this \@thesisdegreeabbreviation}}}
     \end{center}\begin{spacing}{\@defaultbaselinestretch}}
    {\end{spacing} \par
     \raggedleft }
     % Adding \newpage at the end of this environment will set the 'place' on the right of the page.

%%%
%%% Environment to generate vita page.
%%%
\newenvironment{thesisauthorvita}
    {\clearpage
     \chapter*{\@thesisvitahead
         \@mkboth{\uppercase{\@thesisvitahead}}
                 {\uppercase{\@thesisvitahead}}}
    \addcontentsline{toc}{chapter}{\@thesisvitahead}
    \begin{spacing}{\@defaultbaselinestretch}}
    {\end{spacing} \par \vspace{20mm}
     \noindent Permanent Address:
       \begin{minipage}[t]{90mm}
         \thesisauthoraddress
       \end{minipage}
     \par \vspace{15mm}
     \noindent This \lowercase\expandafter{\thesistype} was
       typeset with \LaTeXe\footnote{\LaTeXe{} is an extension of \LaTeX.
       \LaTeX{} is a collection of macros for \TeX.  \TeX{} is a
       trademark of the American Mathematical Society.  The macros used in
       formatting this \lowercase\expandafter{\thesistype} were written
       by Dinesh Das, Department of Computer Sciences, The University
       of Texas at Austin.
    } by \thesistypist.}

\newcommand{\@chapteralignment}{\centering}
\renewcommand{\chapter}{\clearpage
   \ifnum\@appendix=1
     \renewcommand{\@chaptertype}{\appendixname}
   \else
     \renewcommand{\@chaptertype}{\chaptername}
   \fi
   \thispagestyle{plain}%
   \global\@topnum\z@
   \@afterindentfalse
   \secdef\@chapter\@schapter
   }
\renewcommand\appendix{\par
  \setcounter{chapter}{0}%
  \setcounter{section}{0}%
  \renewcommand{\@chapapp}{\appendixname}%
  \renewcommand{\thechapter}{\Alph{chapter}}
  \renewcommand{\@appendix}{1}}

%%%
%%% Define chapter heading placement commands.
%%%
\newcommand{\leftchapter}{
    \renewcommand{\@chapteralignment}{\raggedright}}
\newcommand{\centerchapter}{
    \renewcommand{\@chapteralignment}{\centering}}
\newcommand{\rightchapter}{
    \renewcommand{\@chapteralignment}{\raggedleft}}

%%%
%%% Command from report.cls, (c) LaTeX3 Project.
%%%
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
                      \refstepcounter{chapter}%
                      \typeout{\@chapapp\space\thechapter.}%
                      \addcontentsline{toc}{chapter}%
                          {\@chaptertype{} \protect\numberline{\thechapter}#1}%
                    \else
                      \addcontentsline{toc}{chapter}{\@chaptertype{} #1}
                    \fi
                    \ifnum\value{chapter}=1
                      \ifnum\@appendix=0
                        \pagestyle{\@textpagestyle}
                        \pagenumbering{\@textpagenumbering}
                      \fi
                    \fi
                    \chaptermark{#1}%
                    \addtocontents{lof}{\protect\addvspace{10\p@}}%
                    \addtocontents{lot}{\protect\addvspace{10\p@}}%
                    \if@twocolumn
                      \@topnewpage[\@makechapterhead{#2}]%
                    \else
                      \@makechapterhead{#2}%
                      \@afterheading
                    \fi
                    }

%%%
%%% Command from report.cls, (c) LaTeX3 Project.
%%%
\def\@makechapterhead#1{%
  \vspace*{50\p@}%
  {\parindent \z@ \@chapteralignment \reset@font
    \ifnum \c@secnumdepth >\m@ne
      \huge\bfseries \@chapapp{} \thechapter
      \par
      \vskip 20\p@
    \fi
    \Huge \bfseries #1\par
    \nobreak
    \vskip 40\p@
  }}
\def\@makeschapterhead#1{%
  \vspace*{50\p@}%
  {\parindent \z@ \@chapteralignment
    \reset@font
    \Huge \bfseries  #1\par
    \nobreak
    \vskip 40\p@
  }}


%%%
%%% Command from report.cls, (c) LaTeX3 Project.
%%%
\renewenvironment{thebibliography}[1]
     {\chapter*{\bibname
%         \@mkboth{\uppercase{\bibname}}{\uppercase{\bibname}}}%
         \@mkboth{{\bibname}}{{\bibname}}}%
      \addcontentsline{toc}{chapter}{\bibname}
      \list{\@biblabel{\arabic{enumiv}}}%
           {\settowidth\labelwidth{\@biblabel{#1}}
            \leftmargin
            \labelwidth
            \advance
            \leftmargin
            \labelsep
            \@openbib@code
            \usecounter{enumiv}%
            \let\p@enumiv\@empty
            \renewcommand\theenumiv{\arabic{enumiv}}}%
      \sloppy\clubpenalty4000\widowpenalty4000%
      \sfcode`\.=\@m}
     {\def\@noitemerr{\@warning{Empty `thebibliography' environment}}%
      \endlist}
%%%
%%% Command from report.cls, (c) LaTeX3 Project.
%%%
\renewcommand\listoftables{%
    \if@twocolumn
      \@restonecoltrue\onecolumn
    \else
      \@restonecolfalse
    \fi
    \chapter*{\listtablename
      \@mkboth{\uppercase{\listtablename}}{\uppercase{\listtablename}}}%
    \addcontentsline{toc}{chapter}{\listtablename}
    \@starttoc{lot}%
    \if@restonecol\twocolumn\fi
    }
\renewcommand\listoffigures{%
    \if@twocolumn
      \@restonecoltrue\onecolumn
    \else
      \@restonecolfalse
    \fi
    \chapter*{\listfigurename
      \@mkboth{\uppercase{\listfigurename}}%
              {\uppercase{\listfigurename}}}%
    \addcontentsline{toc}{chapter}{\listfigurename}
    \@starttoc{lof}%
    \if@restonecol\twocolumn\fi
    }
\renewcommand\tableofcontents{%
    \if@twocolumn
      \@restonecoltrue\onecolumn
    \else
      \@restonecolfalse
    \fi
    \chapter*{\contentsname
        \@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}%
    \@starttoc{toc}%
    \if@restonecol\twocolumn\fi
    }

%%%
%%% Command to print draft version of the thesis.
%%%
\newcommand{\thesisdraft}{
    \setlength{\topmargin}{0in}
    \setlength{\headheight}{0.2in}
    \setlength{\headsep}{0.25in}
    \renewcommand{\@textpagestyle}{myheadings}
    \def\ps@myheadings{%
     \let\@oddfoot\@empty\let\@evenfoot\@empty
     \def\@oddhead{\textsl{Draft of \timestamp}\hfil\thepage}%
     \def\@evenhead{\textsl{Draft of \timestamp}\hfil\thepage}%
     \let\@mkboth\@gobbletwo
     \let\chaptermark\@gobble
     \let\sectionmark\@gobble}
    }

%%%
%%% Code to compute current timestamp.  Some parts by Martin Minow.
%%%
\newcount\hour \newcount\minute
\hour=\time  \divide \hour by 60
\minute=\time
\loop \ifnum \minute > 59 \advance \minute by -60 \repeat
\def\thesistime{\ifnum \hour<13 \number\hour:%
                      \ifnum \minute<10 0\fi
                      \number\minute
                      \ifnum \hour<12 \ am\else \ pm\fi
         \else \advance \hour by -12 \number\hour:%
                      \ifnum \minute<10 0\fi
                      \number\minute \ pm\fi}

\def\thesisdate{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}

\newcount\dow
\newcount\leap
\newcount\x
\newcount\y

%leap = year + (month - 14)/12
\leap=\month \advance\leap by -14 \divide\leap by 12
  \advance\leap by \year

%dow = (13 * (month + 10 - (month + 10)/13*12) - 1)/5
\dow=\month \advance\dow by 10
  \y=\dow \divide\y by 13 \multiply\y by 12
  \advance\dow by -\y \multiply\dow by 13 \advance\dow by -1 \divide\dow by 5

%dow += day + 77 + 5 * (leap % 100)/4
\advance\dow by \day \advance\dow by 77
  \x=\leap \y=\x \divide\y by 100 \multiply\y by 100 \advance\x by -\y
  \multiply\x by 5 \divide\x by 4 \advance\dow by \x

%dow += leap / 400
\x=\leap \divide\x by 400 \advance\dow by \x

%dow -= leap / 100 * 2;
%dow = (dow % 7)
\x=\leap \divide\x by 100 \multiply\x by 2 \advance\dow by -\x
  \x=\dow \divide\x by 7 \multiply\x by 7 \advance\dow by -\x

\def\thesisdayofweek{\ifcase\dow
Sunday\or Monday\or Tuesday\or
Wednesday\or Thursday\or Friday\or Saturday\fi}

\def\timestamp{\thesistime, \thesisdayofweek, \thesisdate}

%%%
%%% Commands for spacing.  Some parts from spacing.sty by Stephen Page.
%%%
\ifx\undefined\selectfont
\def\@setsize#1#2#3#4{\@nomath#1
   \let\@currsize#1\baselineskip
   #2\baselineskip\baselinestretch\baselineskip
   \parskip\baselinestretch\parskip
   \setbox\strutbox\hbox{\vrule height.7\baselineskip
      depth.3\baselineskip width\z@}
   \normalbaselineskip\baselineskip#3#4}
\else
\def\@newbaseline{%
    \ifx\undefined\setnew@baselineskip
      \baselineskip\f@baselineskip\relax
    \else
      \setnew@baselineskip
    \fi
    \baselineskip\baselinestretch\baselineskip
    \setbox\strutbox\hbox{\vrule\@height.7\baselineskip
    \@depth.3\baselineskip \@width\z@}%
    \normalbaselineskip\baselineskip}
\fi
%%%
%%% Reset baselinestretch within footnotes and floats. Originally stolen
%%% from Stanford thesis style.
%%%
\long\def\@footnotetext#1{\insert\footins{\def\baselinestretch{1}\footnotesize
    \interlinepenalty\interfootnotelinepenalty
    \splittopskip\footnotesep
    \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
    \hsize\columnwidth \@parboxrestore
   \edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}\@makefntext
    {\rule{\z@}{\footnotesep}\ignorespaces
      #1\strut}}}
%%%
%%% Stolen from MIT.
%%%
\def\spacing#1{\par%
 \begingroup
 \def\baselinestretch{#1}
 \ifx\undefined\selectfont
 \ifx\@currsize\normalsize\@normalsize\else\@currsize\fi
 \else
 \@newbaseline
 \fi}
\def\endspacing{\par
 \vskip \parskip
 \vskip \baselineskip
 \endgroup
 \vskip -\parskip
 \vskip -\baselineskip}

% Jesus Bisbal
% Change name for 'Figure' to 'Fig.', a matter of taste.
\def\figurename{Fig.}
% Change  names for Figure and Table, so that they are bold.
% Taken from report.cls
\def\fnum@figure{\textbf{\figurename~\thefigure}}
\def\fnum@table{\textbf{\tablename~\thetable}}